SRX RWD V8-4.6L VIN A (2006)
Accelerator Pedal Position Sensor: Description and Operation
ACCELERATOR PEDAL POSITION (APP) SENSOR
The accelerator pedal position (APP) sensor is made up of 2 sensors that are housed inside one assembly. The engine control module (ECM) supplies a
separate 5-Volt reference and the low reference circuit for each of the sensors. The 5-Volt reference for APP sensor 1 is supplied from the same source
in the ECM as the 5-Volt reference for the mass air flow (MAF) sensor and the fuel tank pressure (FTP) sensor. The 5-Volt reference voltage for all of
the sensors is supplied on separate ECM terminals, but the terminals are connected internally to a voltage supply. The APP sensor 1 sends a signal from
the sensor to the ECM indicating the accelerator pedal position. The ECM actuates the throttle plates based on this information.