SRX RWD V8-4.6L VIN A (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement - Bank 2 (Left) Intake
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 2 (LEFT) INTAKE
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Disconnect the electrical connector from the left bank intake camshaft position sensor (1).
IMPORTANT: When disconnecting more than one sensor, mark the connectors to ensure correct re-installation. The electrical connectors are
physically interchangeable, however, they must be installed to the correct sensor.
3. Remove the camshaft sensor retaining bolt.
4. Remove the left bank intake camshaft sensor (3).
INSTALLATION PROCEDURE