SRX RWD V8-4.6L VIN A (2006)
4. Install the generator lower bolts.
Tighten the bolts to 50 N.m (37 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the battery positive lead (2) and the generator BAT terminal nut (3) to the generator.
Tighten the nut to 13 N.m (115 lb in).
6. Install the BAT terminal boot.
7. Connect the electrical connector (1) to the generator.
8. Lower the vehicle.
9. Install the drive belt to the generator.
10. Connect the battery negative cable.