SRX RWD V8-4.6L VIN A (2006)
Power Steering Pump: Service and Repair
Power Steering Pump Bracket Replacement
Power Steering Pump Bracket Replacement (LH2)
Removal Procedure
1. Remove the power steering pump.
2. Remove the power steering pump to bracket bolts.
3. Separate the power steering pump from the power steering bracket.
Installation Procedure
1. Install the power steering pump to the power steering bracket.
2. Notice: Install the Power steering pump to bracket bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the power steering pump.