SRX RWD V8-4.6L VIN A (2006)
2. Connect the roof rail module yellow connector (2) to the left roof rail module (1).
3. Install the CPA (3) to the left roof rail module connector (2).
4. Install the left carpet retainer trim.
5. Connect the driver/LF side impact module and seat belt pretensioner yellow connector to the vehicle harness yellow connector (1) located under
the front of driver seat.
6. Install both CPA locks to the LF side impact module and pretensioner yellow connector (1).
7. Connect the steering wheel module coil yellow connector (1) to the vehicle harness yellow connector (3).
8. Install the CPA to the steering wheel module coil yellow connector (1).
9. Install the driver/left sound insulator to the I/P (2).
10. Connect the passenger/I/P module yellow connector (1) to the vehicle harness yellow connector (2).
11. Install the CPA to the I/P module yellow connector (1).
12. Install the passenger/right sound insulator to the I/P (3).
