SRX RWD V8-4.6L VIN A (2006)
3. Notice: Install the control harness retainer and screw.
Tighten the screw to 2.3 Nm (20 inch lbs.).
4. Install the control switch assembly screws
Tighten the screws to 2.3 Nm (20 inch lbs.).
5. Connect the electrical connector to the steering wheel control.
6. Secure the connector to the retaining clip.
7. Install the inflatable restraint module.
8. Enable the SIR. Refer to SIR Disabling and Enabling Zone 3.