SRX RWD V8-4.6L VIN A (2006)
3.
Install the stabilizer shaft bracket mounting bolts.
Tighten
Tighten the bolts to 110 N.m (81 lb ft).
4.
Install the stabilizer shaft link to the stabilizer shaft.
5.
Install stabilizer shaft link to stabilizer shaft retaining nut.
Tighten
Tighten the nut to 115 N.m (95 lb ft).
6.
Install the tires and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
7.
Lower the vehicle.
Disclaimer