SRX RWD V8-4.6L VIN A (2006)
21. Remove the frame to body mounting bolts and washers.
22. Carefully raise the vehicle from the rear frame assembly.
23. Secure the frame to the support table.
24. Remove the following components from the rear frame.
*
Rear Position Sensor Replacement - Electronic Suspension () in Electronic Suspension Controls (ESC)
*
Lower Control Arm Replacement ()
*
Upper Control Arm Replacement ()
*
The rear brake pipes
*
Park Brake Cable Replacement - Left Rear () or Park Brake Cable Replacement - Right Rear () in Park Brake
*
Stabilizer Shaft Replacement ()
*
Adjustment Link Replacement ()
*
Trailing Arm Replacement ()
*
Stabilizer Shaft Link Replacement ()
*
Brake Caliper Replacement - Rear (JL9, JE5) () in Disc Brakes
*
Brake Rotor Replacement - Rear () in Disc Brakes
*
Differential Replacement () in Drive Axle
25. With the aid from an assistant, remove the frame from the engine support fixture.
Installation Procedure
