SRX RWD V8-4.6L VIN A (2006)
Notice: Refer to Fastener Notice () in Service Precautions.
9. Install the rear frame washers and anchor bolts.
*
Tighten the front bolts to 265 N.m (195 lb ft).
*
Tighten the rear bolts to 191 N.m (141 lb ft).
10. Raise the vehicle.
11. Remove the J 39580 from under the vehicle.
12. Install the support fixture (3) in order to raise the lower control arms for ease of lower shock bolt installation (2).
13. Install the lower shock bolt (2).
Tighten the bolt to 150 N.m (111 lb ft).
14. Repeat step 13 for the other side.
15. Remove the support fixture (3).
16. Connect the intermediate park brake cable (2) to the rear park brake cable connector (1).