SRX RWD V8-4.6L VIN A (2006)
Compressor/Pump: Service and Repair
Air Compressor Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the exhaust system from the rear exhaust hangers.
3. Remove the automatic level control (ALC) compressor bracket mounting bolts.
4. Carefully lower the ALC compressor assembly.
5. Twist the air tube at the ALC compressor clamp.
6. Disconnect the air tube from the ALC compressor.
7. Disconnect the ALC electrical harness connector.
8. Remove the ALC compressor bracket side mounting nut.
9. Remove the ALC compressor with the bracket from the vehicle.
