SRX RWD V8-4.6L VIN A (2006)
1. Install the wheel bearing/hub.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the wheel bearing/hub mounting bolts.
Tighten the bolts to 135 Nm (100 ft. lbs.).
3. Install the electrical connector to the splash shield.
4. Connect the ABS electrical connector.
5. Install the brake rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.
6. Install the tire and wheel.
7. Lower the vehicle.
