SRX RWD V8-4.6L VIN A (2006)
8. Remove the mechanics wire (2) securing the front propeller shaft (1) to the shift control lever (3).
9. Install the propeller shaft coupler (1) to the transmission flange.
10. Install the exhaust system.
11. Place the transmission in the park position by rotating the shift shaft fully counterclockwise.
12. Connect the shift linkage to the transmission.
13. Notice: Install the transmission manual shift shaft nut.
Tighten the nut to 9 Nm (80 inch lbs.).
14. Fill the transmission to the proper level.
15. Lower the vehicle.
