SRX RWD V8-4.6L VIN A (2006)
Ring Gear: Service and Repair
Ring Gear and Differential Housing Disassemble
Ring Gear and Differential Housing Disassemble
^
Tools Required
-
J 22912-01 Split-Plate Bearing Puller
1. Remove the 10 ring gear bolts (1) and the ring gear (3) from the differential carrier (2) using a punch and a hammer through the bolt hole.Note:
Differential gears are preloaded and cannot be disassembled or assembled in the field.
2. Using the J 22912-01 and a press, remove the left side bearing. It may be necessary to cut the cage and remove the rollers so the tool will grip the
race.