SRX RWD V8-4.6L VIN A (2006)
Wiper Blade: Service and Repair
Blade Element Cleaning
BLADE ELEMENT CLEANING
Lift each blade assembly off of the windshield and clean the element with a cloth saturated with full strength washer solvent. Hold the blade in one hand
and wipe the element with the saturated cloth until the black residue disappears. Then rinse the blade assembly elements with clean drinkable water.
Blade Element Replacement - Rear
BLADE ELEMENT REPLACEMENT - REAR
The wiper blade element can not be replaced as a separate assembly. Replace the wiper arm blade only.
Wiper Arm Blade Replacement
WIPER ARM BLADE REPLACEMENT
REMOVAL PROCEDURE
1. Cycle the wiper blades to the mid-wipe position on the glass.
IMPORTANT: The wiper blades need to be cycled to the mid-wipe position to prevent the wiper arms contacting the rear edge of the hood.
2. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
3. Bring the wiper arm out through the opening in the wiper blade.
INSTALLATION PROCEDURE
1. Insert the hook of the wiper arm through the opening in the wiper blade.