cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

05-08-64-034|Page 13638 > < Memory Positioning Module|Diagrams|Page 13632
Page 1
background image

Power Mirror Control Module: Customer Interest
Instruments - Outside R/View Mirror Won't Work Smoothly

Bulletin No.: 05-08-64-034

Date: October 24, 2005

TECHNICAL

Subject:
Outside Rearview (OSRV) Mirror Does Not Work Smoothly, Mirror Does Not Return to Programmed Position (Reprogram Driver Door Module
(DDM) and Front Passenger Door Module (FPDM))

Models:
2005 Cadillac STS

Built Prior to April 5, 2005

Attention:

Use GMVIS to determine vehicle build date. This bulletin only applies to vehicles built prior to April 5, 2005.

Condition

Some customers may comment that the outside rearview (OSRV) mirrors do not work smoothly and at times do not return to their programmed position.

Correction

Technicians are to reprogram the Driver Door Module (DDM) and the Front Passenger Door Module (FPDM) with an updated software calibration.
These new service calibrations were released with TIS satellite data update version 10.5 available October 17, 2005. As always, make sure your Tech
2(R) is updated with the latest software version.

Warranty Information

For vehicles repaired under warranty, use the table.

05-08-64-034|Page 13638 > < Memory Positioning Module|Diagrams|Page 13632