STS V8-4.6L VIN A (2005)
3. Seat the stationary window assembly rearward into the door frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the stationary window post bolt.
Tighten the bolt to 9 N.m (80 lb in).
5. Install the window weatherstrip into the door frame.
1. Insert the upper forward corner into the door frame.
2. Install the upper portion of the weatherstrip into the door frame.
3. Working downward from the center-pillar install the remainder of the window weatherstrip.
6. Install the window. Refer to Window Replacement - Rear Door (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Window
Glass/Service and Repair) .
7. Install the window outer belt sealing strip. Refer to Channel, Applique, Weatherstrip, Sealing Strip Replacement - Rear Door (See: Rear Door
Weatherstrip/Service and Repair) .
8. Install the window inner belt sealing strip. Refer to Channel, Applique, Weatherstrip, Sealing Strip Replacement - Rear Door (See: Rear Door
Weatherstrip/Service and Repair) .
9. Install the water deflector. Refer to Water Deflector, Check Link, Energy Absorber Replacement - Rear Door (See: Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Water Deflector, Check Link, Energy Absorber Replacement - Rear Door) .
10. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair
