STS V8-4.6L VIN A (2005)
Engine Mount Replacement - Right (W/RWD)
Engine Mount Replacement - Right (w/RWD)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right engine mount bracket.
3. Remove the engine mount retaining nut.
4. Remove the engine mount from the vehicle.
Installation Procedure
1. Install the engine mount to the vehicle.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine mount retaining nut.
Tighten the nut to 80 Nm (59 ft. lbs.).
3. Install the right engine mount bracket.
4. Lower the vehicle.