STS AWD V6-3.6L (2007)
The timer records elapsed time starting from activation. When the driver information center (DIC) displays the timer, pressing the INFO RESET button
for 1.0 seconds on the DIC resets the timer. Pressing the INFO RESET button on the DIC switch for approximately 1.0 seconds starts and stops the
timer. The DIC displays the timer in one of the following formats:
*
XX:XX:XX TIMER (ON)
*
XX:XX:XX TIMER (OFF)
The first XX represents hours elapsed, the second XX represents minutes elapsed, and the third XX represents seconds elapsed. The ON or OFF
indicates whether the timer is currently running. The maximum range of the timer is 99 hours, 59 minutes, and 59 seconds. After the maximum range is
reached, the timer displays all zeros (00:00:00).
Tire Pressure Monitor
The instrument panel cluster (IPC) receives a GMLAN message from the tire pressure monitoring (TPM) system for front and rear tire pressure data.
The driver information center (DIC) will display the pressure for each of the front and rear tires. When a tire with low air pressure is present, the DIC
displays XX TIRE PRESSURE LOW.
ENGLISH DISPLAY UNITS (METRIC DISPLAY UNITS)
This display allows you to select between English and metric units of measurement if your vehicle has the uplevel DIC. Press the reset button to switch
between English and metric units.
ENGINE BOOST (STS-V Only)
This display shows a graphic that indicates the amount of boost the engine is receiving in either pounds per square inch (psi) or kilopascals (kPa).
ENGINE OIL TEMPERATURE (STS-V Only)
This display shows the engine oil temperature in either degrees Fahrenheit (°F) or degrees Celsius (°C).
OIL PRESSURE (STS-V Only)
This display shows the oil pressure in either pounds per square inch (psi) or kilopascals (kPa).
TRANS (Transmission) FLUID TEMP (Temperature) (STS-V Only)
This display shows the transmission fluid temperature in either degrees Fahrenheit (°F) or degrees Celsius (°C).
Trip Information Display Menu
The following display menu items can be displayed by pressing the trip Information button:
Odometer
-
Press the trip information button until the odometer appears on the DIC display. The odometer shows the total distance the vehicle has been driven
in either miles (mi) or kilometers (km).
Trip Odometer
-
Press the trip information button until trip odometer A or B appears on the DIC display. The trip odometer shows the current distance traveled
since the last reset for each trip odometer in either miles (mi) or kilometers (km). Both odometers can be used at the same time.
For base level vehicles, each trip odometer can be reset to zero separately by pressing and holding the bottom of the trip information button while the
desired trip odometer is displayed. For uplevel vehicles, reset each trip odometer by pressing the reset button or by pressing and holding the trip
information button while the desired trip odometer is displayed.
