STS AWD V6-3.6L (2007)
3. Disconnect the electrical connector.
4. Remove the speaker (2).
Installation Procedure
1. Install the speaker (2).
2. Connect the electrical connector.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the nuts securing the center speaker (2).
Tighten the nuts to 9 N.m (80 lb in).
4. Install the rear shelf trim panel.
Radio Rear Speaker Replacement (Left)
Radio Rear Speaker Replacement (Left)
Removal Procedure
1. Remove the rear shelf trim panel.
2. Remove the nuts securing the left speaker (3).
3. Disconnect the electrical connector.
4. Remove the speaker (3).
Installation Procedure