STS AWD V6-3.6L (2007)
* Air Quality/K14
* HV Seat/KB6 - Heated/Vented Seat
* Metric FE Units - Fuel Economy Units
* DRL/Z49 - Daytime Running Lamps
* HID/TT6/TT7/TT8 - High Intensity Discharge Lamps
* Fog Lmps not Us/Can
* SWC/K59 - Steering Wheel Control Switches with Adaptive Cruise Control
* SWC/UE1 - with OnStar(R)
* SWC Htd St WHL - with Heated Steering Wheel
After all options were set, save them using Save Options. If the option setting was successfully, Procedure Complete message will be displayed. The
power mode will toggle from Run to Accessory.
Important: After setup, perform the following to avoid future misdiagnosis:
1. Turn the ignition OFF for 10 seconds.
2. Connect the scan tool to the data link connector (DLC).
3. Turn the ignition ON, with the engine OFF.
4. Use the scan tool in order to retrieve history DTCs from all modules.
5. Clear all history DTCs.
