STS AWD V6-3.6L (2007)
Hood Latch Release Cable: Service and Repair
Hood Latch Release Cable Replacement
Removal Procedure
1. Open the hood.
2. Remove the hood latch.
3. Disconnect the hood release cable from the hood latch.
4. Tie a piece of string around the hood release cable. This will ease the installation of the hood release cable through the engine compartment.
5. Remove the fasteners (3) securing the hood release handle (1) to the vehicle.
6. Disconnect the hood release cable (2) from the hood release handle (1).
7. Tie a piece of string around the hood release cable (1). This will ease the installation of the hood release cable through the engine compartment.
8. Remove the hood release cable grommet from the wheel opening.
9. Remove the hood release cable (1) from the vehicle.