STS AWD V6-3.6L (2007)
3. With the aid of an assistant, position and secure the new frame assembly to the support fixture.
4. With the aid of an assistant, carefully lower the body to the frame.
5. Ensure the following components are clear from the frame:
*
The electrical harness
*
The steering knuckle assembly
*
The brake pipes
Notice: Refer to Fastener Notice.
6. Install the frame mountings bolts (2).
Tighten the bolts to 191 N.m (141 lb ft).
7. Raise the vehicle.
8. Install the engine mount lower retaining nuts (2).
Tighten the nuts to 50 N.m (37 lb ft).
9. Remove the J 39580.
