STS AWD V6-3.6L (2007)
1. Route the rear seat shelf panel (2) to the rear cross car beam at the dual lock fasteners (1).
2. Position the rear center shoulder belt through the rear shelf panel.
3. Ensure the shoulder belt is not twisted.
4. Lower the rear shelf panel over the child restraint tether anchors and apply pressure at both dual lock fasteners (1) to secure.
5. Secure the shoulder belt escutheon to the rear shelf panel.
6. Insert the escutheon rearward and snap the front downward in place to secure.
7. Install both rear upper quarter sail panels.
8. Install the rear seat back.
9. Install the rear seat cushion.
Sail Panel Replacement
Sail Panel Replacement
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the screw cover from the sail panel.
Important: The upper sail panel is secured with a fastener. Use a magnetic-tipped screwdriver in order to remove the fastener.
3. Remove the fastener.
4. Pull downward on the lower front portion of the sail panel in order to release the integral clip.