STS AWD V6-3.6L (2007)
Sunroof / Moonroof Motor: Removal and Replacement
Sunroof Motor/Actuator Replacement (Smart Motor)
Removal Procedure
1. Lower the headliner in order to access the sunroof motor/actuator. Refer to Headlining Trim Panel Replacement.
2. Disconnect the electrical connector.
3. Remove the screws securing the sunroof motor/actuator to the module.
Installation Procedure
1. Install the sunroof motor/actuator to the sunroof module.
Notice: Refer to Fastener Notice.
2. Install the sunroof motor/actuator screws.
Tighten the screws to 6 N.m (53 lb in).
3. Connect the electrical connector.
4. Verify the sunroof operation.
5. Initialization /Teach the sunroof motor. Refer to Sunroof Motor/Actuator Initialization/Teach Process. See: Procedures
6. Install the headliner.
7. Refer to Control Module References for programming and setup information. See: Testing and Inspection/Programming and Relearning