STS AWD V6-3.6L (2007)
13. Remove the brake caliper pin bolts.
14. Remove the brake caliper from the brake caliper bracket.
Installation Procedure
Important:
*
Ensure that the caliper guide pin boots (2) are fully seated to the caliper guide pin retaining seat (3) of the caliper guide pin.
*
Ensure that the caliper guide pin boots (2) are fully seated to the caliper boot seal retaining seat (1) of the brake caliper mounting
bracket.
Inspect the caliper guide pin boots (2) for cuts, tears, or deterioration. If damaged, replace the slides and boots.
1. Install the brake caliper to the brake caliper bracket.
Important: If reusing the brake caliper pin bolts, the threads of the caliper pin bolts and the threads of the caliper bracket mounting
holes must be free of residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
2. Prepare the bolts and the threaded holes for assembly:
*
Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the threaded holes by using denatured alcohol or equivalent and allow to dry.
