STS AWD V6-3.6L (2007)
Important: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
6. Use a paint stick to create an alignment mark on one of the timing chain links (2) and the adjacent tooth on the exhaust camshaft position actuator
(1).
7. Use a paint stick to create an alignment mark on one of the timing chain links (3) and the adjacent tooth on the intake camshaft position actuator
(4).
Notice: A wrench must be used on the hex of the camshaft when loosening or tightening in order to prevent component damage. Failure to prevent
the torque reaction against the timing drive chain can lead to timing drive chain failure.
8. Use an open end wrench on the hex cast into the left intake and exhaust camshafts and rotate the camshafts toward each other in order to create
slack in the chain between the actuators.
9. Unscrew the EN-48313 so that the legs of the tool are retracted.
