STS AWD V6-3.6L (2007)
parallel with the camshaft cover rail (1).
Notice: A wrench must be used on the hex of the camshaft when loosening or tightening in order to prevent component damage. Failure to prevent
the torque reaction against the timing drive chain can lead to timing drive chain failure.
Important:
‹› Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
‹› DO NOT remove the camshaft position actuator bolt at this time.
6. Loosen the camshaft position actuator bolt.
Important: Ensure that the tips of the EN 46108 are fully engaged into the timing chain (3 and 4).
