STS AWD V6-3.6L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Tools Required
EN-48018 Flywheel Holding Tool
Removal Procedure
1. Remove the A/C compressor and power steering pump drive belt.
2. Remove the generator and water pump drive belt.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the transmission bell housing inspection hole cover.
5. Install the EN-48018 flywheel holding tool as shown.
6. Remove the front air deflector.
7. Remove the crankshaft balancer.
Installation Procedure
