STS AWD V6-3.6L (2007)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Left Side
Exhaust Manifold Replacement - Left Side (LY7)
Removal Procedure
Caution: Refer to Exhaust Service Caution.
Caution: Refer to Protective Goggles and Glove Caution.
1. Remove the exhaust manifold heat shield.
2. Remove the oil level indicator.
3. Remove the catalytic converter nuts.
4. Remove the exhaust manifold bolts.
Important: Do not reuse the gasket.
5. Remove the exhaust manifold and discard the exhaust manifold gasket.
6. Clean and inspect the exhaust manifold.
Installation Procedure
Important: Inspect the catalytic converter seal/heat shield sealing surface. Replace the seal/heat shield if the sealing surface is worn or
damaged.