STS AWD V6-3.6L (2007)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Right Side
Air Temperature Actuator Replacement - Right Side
Removal Procedure
1. Remove the air inlet assembly.
2. Remove the right air temperature actuator screws (1).
3. Remove the right air temperature actuator.
4. Disconnect the right air temperature actuator electrical connector.
Installation Procedure
1. Connect the right air temperature actuator electrical connector.
2. Install the right air temperature actuator.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the right air temperature actuator screws (1).
Tighten the screws to 1 N.m (9 lb in).
