STS AWD V6-3.6L (2007)
Important: Reposition the power steering cooler aside to aid in removing the condenser.
15. Reposition the power steering cooler.
16. Remove the condenser.
Installation Procedure
1. If replacing the condenser, add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities.
2. Install the condenser.
3. Reposition the power steering cooler into position.
4. Install a new O-ring to the condenser tube.
5. Connect the condenser tube to the condenser.
Notice: Refer to Fastener Notice in Service Precautions.
