STS AWD V6-3.6L (2007)
14. Remove the power steering cooler line to condenser retaining bolts.
15. Remove the condenser.
Installation Procedure
1. If replacing the condenser, add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities.
2. Install the condenser.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power steering cooler line to condenser retaining bolts.
Tighten the bolt to 9 N.m (80 lb in).
4. Install a new O-ring to the condenser tube.
5. Connect the condenser tube to the condenser.
