STS AWD V6-3.6L (2007)
6. Remove the TXV line bracket.
7. Remove the TXV from the evaporator core.
8. Separate the TXV from the A/C lines by pulling straight out.
9. Remove the TXV.
Installation Procedure
1. Lubricate the O-rings. Refer to O-Ring Replacement.
2. Install the A/C lines into the TXV.
3. Carefully slide the TXV onto the evaporator core until seated.
4. Install the TXV line bracket.
Notice: Refer to Fastener Notice.
