STS AWD V6-3.6L (2007)
Heads Up Display Unit: Removal and Replacement
Instrument Cluster Head Up Display Replacement
Instrument Cluster Head Up Display Replacement
Removal Procedure
1. Remove the instrument panel (I/P) retainer.
2. Remove the screws securing the heads up display to the I/P.
3. Disconnect the electrical connectors.
Installation Procedure
1. Connect the electrical connectors.
Notice: Refer to Fastener Notice.
2. Install the screws securing the heads up display to the I/P.
Tighten the screws to 2 N.m (18 lb in).
3. Install the I/P retainer.
Head Up Display Switch Replacement
Head Up Display Switch Replacement