STS AWD V6-3.6L (2007)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Inlet Duct Replacement
Removal Procedure
1. Turn the ignition OFF.
2. Remove the front compartment sight shields as necessary.
3. Remove the positive crankcase ventilation (PCV) hose from the air cleaner duct resonator.
4. Loosen the air cleaner duct clamps.
5. Remove the air cleaner duct.
Installation Procedure
1. Install the air cleaner intake duct.
2. Install the PCV hose to the intake duct resonator.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Tighten the air cleaner duct clamps.
Tighten the clamps to 4 N.m (35 lb in).
4. Install the front compartment sight shields as necessary.