STS AWD V6-3.6L (2007)
Heater Hose: Service and Repair
Heater Pipes Replacement
Heater Pipes Replacement
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System (GE 47719) Draining and Filling Cooling System (Static Fill).
2. Lower the vehicle.
3. Remove the injector sight shield.
4. Using J 38185, disengage the hose clamp and disconnect the heater outlet hose (1) from the heater pipe assembly.
5. Using J 38185, disengage the hose clamp and disconnect the heater inlet hose (2) from the heater pipe assembly.
6. Using J 38185, disengage the hose clamp and disconnect the surge tank outlet hose from the heater pipe assembly.