STS AWD V6-3.6L (2007)
15. Use an open end wrench on the hex cast into the body of the EN-48313 and hand tighten the T-handle.
Notice: A wrench must be used on the hex of the camshaft when loosening or tightening in order to prevent component damage. Failure to prevent
the torque reaction against the timing drive chain can lead to timing drive chain failure.
16. Use an open end wrench on the hex cast into the right intake and exhaust camshafts and rotate the camshafts towards each other in order to create
slack in the chain between the actuators.
17. The EN-48313 is now properly installed to hold the timing chain in position.
