STS AWD V6-3.6L (2007)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
Metal Collar Quick Connect Fitting Service
Tools Required
* J 37088-A Fuel Line Disconnect Tool Set
* J 44581 Fuel Line Disconnect Tool
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
2. Remove the retainer from the quick-connect fitting.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Depending on the fuel line size and ability to access the fitting, choose the appropriate tool: J 37088-A or J 44581. Insert the J 37088-A or J
44581 into the female connector, then push inward to release the locking tabs.