STS AWD V6-3.6L (2007)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
Removal Procedure
1. Turn the ignition OFF.
Important: Do not disconnect the power steering fluid lines/hoses from the reservoir.
2. Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir in order to provide access.
3. Remove the camshaft position (CMP) sensor electrical connector.
4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
Installation Procedure