STS AWD V6-3.6L (2007)
6. Adjust the caster and the camber angle by repositioning the lower control arm until the specifications have been met.
When the adjustments are complete, hold the lower control arm in position so that the specifications do not change while tightening the lower
control arm adjustment bolts.
Tighten the lower control arm adjustment bolts to 135 N.m (96 lb ft).
7. Verify that the caster and the camber are still within specifications. Refer to Wheel Alignment Specifications.
When the caster and camber are within specifications, adjust the toe. Refer to Front Toe Adjustment.
