STS AWD V6-3.6L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet Pipe/Hose Replacement
Power Steering Gear Inlet Pipe/Hose Replacement (LY7)
Removal Procedure
1. Remove the front air deflector.
3. Remove the air cleaner intake duct.
4. Loosen the air cleaner assembly front half retaining screws.
5. Remove the air cleaner assembly front half.
6. Remove the power steering gear inlet hose fitting from the power steering pump.
7. Raise and support the vehicle. Refer to Vehicle Lifting.
8. Remove the power steering gear inlet hose to the frame mounting bolts.