STS AWD V6-3.6L (2007)
Steering Gear: Service and Repair
Power Steering Gear Replacement
Tools Required
*
J 24319-B Steering Linkage and Tie Rod Puller
*
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
1. Install the J 42640 to the steering column.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the front tires and wheels.
4. Remove the front air deflector.
Caution: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or
intermediate shaft. This damage can cause loss of steering control which could result in personal injury.
Notice: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column
or intermediate shaft from the steering gear. Failure to do so will cause the coil assembly in the steering column to become uncentered which will
cause damage to the coil assembly.
5. Remove the intermediate shaft lower pinch bolt.
6. Disconnect the intermediate shaft from the power steering gear.
