STS AWD V6-3.6L (2007)
1. Install the trailing link to the vehicle.
Important: Loosely install the trailing link before tightening.
2. Install the trailing link to frame bolt.
3. Install the trailing link to frame nut.
4. Raise the frame with a suitable jack.
Notice: Refer to Fastener Notice.
5. Install the front bolts to the frame.
Tighten the bolts to 265 N.m (195 lb ft).
6. Remove the jack.
7. Support the lower control arm with a suitable jack for alignment of the trailing link and the knuckle.