STS AWD V6-3.6L (2007)
Important: Inspect the 4 filter plate retaining tabs on the control solenoid valve assembly. A broken or missing tab may not adequately
secure the filter plate to the control solenoid valve assembly.
1. Install a NEW filter plate assembly (1).
Important: Note the locator pin on the control valve lower body assembly.
2. Align the control solenoid valve assembly (1) to the control valve lower body assembly.
3. Install the 2 bolts (2), through the "heat sink" side of the control solenoid valve assembly (1). Hand tighten only.
