cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Fluid - A/T|Service and Repair > < 5L40-E/5L50-E Transmission Fluid Checking Procedure|Page 11429
Page 2
background image

*

If the fluid color is very dark or black and has a burnt odor, inspect the fluid and inside of the bottom pan for excessive metal particles or other
debris. A small amount of "friction" material in the bottom pan is a "normal" condition. If large pieces and/or metal particles are noted in the
fluid or bottom pan, flush the oil cooler and cooler lines and overhaul the transmission. If there are no signs of transmission internal damage
noted, replace the fluid filter assembly, repair the oil cooler, and flush the cooler lines.

*

Fluid that is cloudy or milky or appears to be contaminated with water indicates engine coolant or water contamination. Refer to Engine
Coolant/Water in Transmission.

8. Replace the trans oil level check plug and tighten to 25 N.m (18 lb ft).
9. Inspect for external leaks. Refer to Fluid Leak Diagnosis.

10. Reset the oil life monitor only if the fluid was changed.

Fluid - A/T|Service and Repair > < 5L40-E/5L50-E Transmission Fluid Checking Procedure|Page 11429