STS AWD V6-3.6L (2007)
7. Connect the TOC line to the TOC retainer clip (1).
8. Connect the TOC lines to the TOC.
Tighten the fittings to 20 N.m (15 lb ft).
9. Reposition and reinstall the condenser. Refer to Condenser Replacement (Heavy Duty Cooling) Condenser Replacement (Standard Cooling).
Transmission Fluid Cooler Pipe Replacement - Rear
Transmission Fluid Cooler Pipe Replacement - Rear (w/AWD)
Tools Required
J 44827 Transmission Cooler Quick Connect
Removal Procedure
1. Remove the engine oil filter.
2. Remove the left hand (LH) intermediate shaft bearing assembly.