STS AWD V6-3.6L (2007)
5. Reposition the radiator.
Notice: Refer to Fastener Notice.
6. Install the bolts that secure the radiator support brackets.
Tighten the bolt to 9 N.m (80 lb in).
7. Install the bolts that secure the TOC line to the cooling fan shroud.
Tighten the bolt to 6.5 N.m (58 lb in).
8. Reposition and reinstall the condenser.
Transmission Fluid Cooler Pipe Replacement - Rear
Transmission Fluid Cooler Pipe Replacement - Rear
Tools Required
J 44827 Transmission Cooler Quick Connect
Removal Procedure
1. Using the J 44827, disconnect the front transmission oil cooler (TOC) line from the rear TOC line.
2. Remove the left hand (LH) front wheel.
3. Remove the LH front splash shield retainers.
4. Remove the LH front splash shield.
5. Using the J 44827, disconnect the rear transmission oil cooler TOC lines from the radiator.