STS AWD V6-3.6L (2007)
Shift Linkage: Adjustments
6L50/6L80/6L90 - Automatic Transmission
Shift Control Linkage Adjustment (All Wheel Drive)
1. Position the shift lever in PARK.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Loosen the shift control linkage adjustment nut to allow the adjuster to slide freely.
Notice: Refer to Fastener Notice.
4. Hold the selector lever on transmission against the rear stop to eliminate any play.
Tighten the shift control linkage adjustment nut to 9 N.m (80 lb in).
5. Lower the vehicle.
