STS AWD V6-3.6L (2007)
3. Install the 2-3 shift solenoid retainer into the control valve body.
4. Connect the electrical wiring harness connector (1) to the 2-3 shift solenoid (2).
5. Install the transmission fluid pan.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
6. Reset the TAP values. Refer to Transmission Adaptive Functions (5L40-E/5L50-E) Transmission Adaptive Functions (5L50-E).
4-5 Shift Solenoid Replacement
4-5 Shift Solenoid Replacement
Removal Procedure
1. Remove the transmission fluid pan.
2. Disconnect the electrical wiring harness connector (1) from the 4-5 shift solenoid (2).
