STS AWD V6-3.6L (2007)
Notice: Refer to Fastener Notice.
Important: The transmission mount bolts must be tightened in the proper order.
2. Tighten the left side transmission mount assembly bolt.
Tighten the bolts to 110 N.m (81 lb ft).
3. Tighten the right side transmission mount assembly bolt.
Tighten the bolts to 110 N.m (81 lb ft).
4. Install the transmission mount to body mounting bolts.
Tighten the bolts to 60 N.m (44 lb ft).
5. Remove the transmission support.
6. Install the exhaust system.
7. Lower the vehicle.
